Icon THE LAB
[SERIES: GRAVITY]

Own plant · Hand-assembled rigid boxes · No middle layer

Custom Magnetic
Rigid Boxes

Engineered for the first click.

A magnetic rigid box is wrapped greyboard held shut by hidden magnets. Two decisions decide whether it feels premium: board thickness, and where the magnets sit. Both are locked before the print run — never after.

Start Engineering Your Project
Magnetic rigid box, wrapped greyboard with hidden magnet closure

Three Ways a Magnetic Box Goes Wrong

These are the three failures that reach us from buyers who sourced elsewhere first. None of them is about printing, and all three are locked in before the print run.

The lid drifts.

Magnet pockets set by eye instead of by a spec sheet, and the lid slides instead of snapping. Magnet position is a dimensional tolerance question, not a decoration question — it gets set from the drawing, then proven on a working sample. Read what to specify.

The wrap bubbles.

Board and paper carry different moisture. Wrap them at different humidities and the surface lifts within days. We condition board before wrapping rather than compensating with heavier lamination — the surface treatment documents a conditioning problem, it does not solve one. The options sit in the Material & Finishing Lab.

The freight volume.

A fixed rigid box ships assembled. You are paying to move air across the ocean, on every unit, on every lane. A collapsible construction changes that arithmetic — which is why the structure you choose and the freight you pay are the same decision.

The Engineering That Makes It Feel Expensive

Four variables carry the whole impression. None of them is visible in a photograph, and all four are decided before the run — which is why the sample stage is where a magnetic box is actually made.

Board thickness sets the weight in hand.

900 / 1000 / 1200 / 1500 / 2000 gsm greyboard, selected against product weight, box footprint and how much the lid has to resist bowing. Thin board over a wide face is where cheap magnetic boxes give themselves away — the lid flexes under its own span and the edge stops meeting the base cleanly.

Magnet grade, count and pocket depth.

Pull is the product of four variables: magnet grade, diameter, thickness, and how deep the pocket sits inside the board. Change one and the click changes. This is why the grade is selected against the box, not bought off a shelf — and why we confirm the feel on the sample instead of quoting a figure that was measured on a bare magnet.

Hidden integration.

Magnets are set inside the greyboard layers, then covered by the wrap — the closure is felt, never seen. Pocket position is driven by the drawing so a re-order matches the first run instead of merely resembling it.

Seamless edge wrapping.

One continuous wrap around the edges, tensioned to the board lot. Corners are where rigid boxes either look engineered or look assembled, and the wrap is the last operation that can hide — or expose — everything decided before it.

Board grades and assembly logic per published structure specs · magnet behaviour confirmed on the working sample, never quoted as a number

Magnetic, Lid & Base, Drawer or Carton

Four rigid-side structures, one table. The decision is rarely "which is best" — it is which closure matches the way your customer opens the box, and how much air you are willing to ship.

Dimension Magnetic rigid Lid & base (setup) Drawer (sliding) Folding carton
Closure Hidden magnets Lid over base Sliding tray + sleeve Tuck / glue flap
Board range 900–2000 gsm greyboard 900–2000 gsm greyboard 900–2000 gsm greyboard Folding board / micro-flute
Cost driver #1 Magnet count + hand assembly Wrapping + hand assembly Tray build + sleeve tolerance Die + print run
Cost driver #2 Board thickness Board thickness Board thickness Paper grade
Freight volume High when fixed High Medium Low (ships flat)
Unboxing moment Strongest — tactile click Classic, formal Reveal on pull None by design
Best fit Premium DTC, gifting, PR Formal gifting, cosmetics Jewellery, accessories Retail shelf, supplements

Board ranges and cost drivers per published structure specs · no price figures anywhere on this page — see the cost guide for what moves a quote

Two of those columns have their own pages: the formal, lower-assembly option is lid and base boxes (called setup boxes in the US), and the pull-reveal option is custom drawer boxes. If you are weighing the first column against the second, that comparison has its own worked-through read: magnetic box vs lid and base box. And if the number rather than the opening is what you need to settle first, start with what drives a magnetic gift box quote.

Where Magnetic Boxes Earn Their Cost

The structure is the same; the reason it pays is different in each category. What they share is that the customer, not the warehouse, opens the box.

Four published structures cover most of what this structure is asked to do. Each has its own spec sheet — board, MOQ band, lead time and DDP destinations — so nothing here has to be taken on trust:

Specification Shortcut

Four inputs, one first pass. This tool narrows the lane — it does not finish the job, and it deliberately ends with the list of things an engineer still has to check against your drawing.

First-pass output

Suggested board band
—
Suggested structure
—
Magnet placement note
—
Quantity note
—

Requires engineer review

    Tool output is a first pass. Every dimension is re-checked against your drawing by an engineer before quoting.

    What Backs the Claim

    Own plant, hand-assembled rigid boxes. Fifteen years of packaging manufacturing, 20,000 m² under one roof, and a team of 400+ including 100+ engineers and technicians. Board, printing, die-cutting and assembly run inside our own factory, so the quote carries no trading-layer retention and no re-briefing loss between plants. Hand assembly is our line, not an outsourced step.

    Working sample first. Working sample first, with the magnetic fit proven on the real wrap; sample cost credited back toward the production order. The sample is where the closure is actually decided — everything on this page before that point is a specification.

    Published numbers only. Board grades, MOQ bands, lead times and DDP destinations on this page come from the published spec sheets; this page does not extend them. Where a figure does not exist, the page says so rather than filling the gap.

    And a deliberately short loop. Send the dimensions, the quantity and the destination market — an engineer replies with a structure recommendation and the board band that fits it, not a catalogue price. The working sample follows, the fit is checked on the real wrap, and only then does the specification lock. Anything changed after the die is cut costs tooling rather than materials, which is why the sample is treated as the decision point rather than a formality.

    The evidence behind those claims — structures, finishes and photographs from the line — is collected on the product shelf.

    Custom Magnetic Rigid Boxes, Answered

    What is a magnetic rigid box made of? +

    A wrapped greyboard core with magnets set inside the board layers before the wrap goes on. The greyboard carries the structure and the weight in hand; the wrap carries the print and the finish; the magnets carry the closure. Because the magnets sit under the wrap rather than on the surface, the closure is felt rather than seen — no visible hardware, no plastic catch.

    How many magnets does a box need? +

    It follows the lid area and the board thickness, not a fixed count. A larger lid needs its hold distributed across more positions, and a thicker board changes how far apart the magnet pairs sit. Both are set from the drawing and then confirmed on the working sample, where the actual opening feel is the test — not a specification sheet.

    Is a magnetic box worth it over a folding carton? +

    Only if the unboxing is a brand moment. A folding carton ships flat, prints beautifully and costs far less; a magnetic rigid box does not collapse, costs far more, and exists to be opened in front of someone. If the customer opens it on camera, filmed or gifted, the structure earns its place. If it is opened by staff or shipped inside an outer carton, the carton wins on economics.

    What is the MOQ for custom magnetic boxes? +

    300 to 1,000 units for hand-assembled rigid boxes, with lower quantities possible on stock sizes where the die and the magnet positions already exist. The floor is set by assembly rather than materials: the line costs the same to set up whether it runs for one day or four.

    Can magnetic rigid boxes be recycled? +

    The board is recyclable, and it is worth being precise about the rest: embedded magnets are the friction point at end of life, because they may need separating before the board goes into a paper stream. Ask for the magnet specification before you make a recyclability claim in your own marketing — a box described as fully recyclable without that caveat is a claim you will have to defend.

    Are magnetic boxes strong enough to ship? +

    A rigid box protects and presents; it is not transit packaging by default. High-value orders usually pair it with an outer corrugated mailer, which absorbs the carrier network while the rigid box stays intact for the customer. Treating a rigid box as the only layer between your product and a sorting facility is where damage claims come from.

    How long does it take? +

    Sample 3–5 days once the structure is confirmed; production around 15 days after artwork approval; DDP transit then adds 9–45 days to the US, EU and UK, and 11–50 days to Australia. The quote states the per-destination lead time before you order rather than after, and the sample is credited back toward production.

    Keep Reading

    The delivery

    Start Engineering Your Project

    Send your product dimensions and quantity — our engineers reply with the honest structure recommendation, the board band that fits it, and a DDP-inclusive quote with duties included.

    Start Engineering Your Project

    DDP-inclusive quote · Working sample first · Response within one business day